From: Kevin Chen <chenxlbr@gmail.com>
To: rauc@pengutronix.de
Subject: [RAUC] booted slot issue
Date: Sat, 11 Nov 2017 00:28:01 +0800 [thread overview]
Message-ID: <CAEQuCVvafTyH4OOzJku9wYgKGVROQ42a56hTGCRz+JFHcdMuGw@mail.gmail.com> (raw)
Hi all,
I am newer for RAUC.These days I learn RAUC on my NXP iMX6UL
project.Now, I use initramfs to test it.Below is my steps.
1.boot initramfs from sd card
2.start service through "rauc service"
3.use "rauc status" to check RAUC
Now, I got an error.
Failed to determine slot states: Did not find booted slot
Here is my system.conf content.
[system]
compatible=i2c-b6ull
bootloader=uboot
[keyring]
path=ca.cert.pem
[slot.rootfs.0]
device=/dev/mmcblk1p3
type=ext4
bootname=system0
My board use emmc flash and uboot, it has three partitions.I only use
mmcblk1p3 to test install bundle whether it works correctly.
In my opinion, the "bootname" is flag the mmcblk1p3 as boot slot.So I
am confuse about the "booted slot" tips.Did I missing some boot config
for RAUC? Thanks
---
Kevin Chen
ShenZhen Guangdong, China
_______________________________________________
RAUC mailing list
next reply other threads:[~2017-11-10 16:28 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-10 16:28 Kevin Chen [this message]
2017-11-10 18:20 ` Middelschulte, Leif
2017-11-11 5:52 ` Kevin Chen
2017-11-11 8:16 ` Kevin Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAEQuCVvafTyH4OOzJku9wYgKGVROQ42a56hTGCRz+JFHcdMuGw@mail.gmail.com \
--to=chenxlbr@gmail.com \
--cc=rauc@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox